Table of Contents
Advertisement
Troubleshooting
Procedures
If you have a problem with your wireless phone, you may be able to solve it by following
the procedures listed here. If you cannot resolve the problem, call for help as described
on the inside front cover of this booklet.
Installation Problems
Symptom
After plugging the
radio module or
carrier into an
electrical outlet, one
or more radio
module POWER
LEDs do not light.
After plugging the
radio module or
carrier into an
electrical outlet, a
radio module's
PASS LED does not
light.
* See "Customer Support" on the inside front cover of this booklet.
Possible Causes
Radio module or carrier(s)
are plugged into an electrical
outlet controlled by a switch.
Power cord of radio module
or carrier(s) is not inserted
properly.
Power cord of radio module
or carrier(s) is defective.
Radio modules are not
synchronized properly.
Radio module or carrier is
inoperable.
5
Possible Solutions
Plug the radio module or
carrier(s) into an outlet not
controlled by a switch.
Unplug the AC adapter from
the electrical outlet. Discon-
nect and then carefully reinsert
the power cord into the radio
module or carrier(s). Plug the
AC adapter back into the
electrical outlet.
Call for help.*
1.
Power down, then repower
the control carrier.
2.
Power down, then repower the
expansion carrier(s).
3.
If the problem persists, call
for help.*
Call for help.*
Troubleshooting
5-1
Advertisement
Table of Contents
