Table of Contents
Advertisement
Slowly swing the radio module's card edge out of
4
the card edge connector on the back of the
carrier, releasing the snap lock when clear. Unhook the
radio module from the radio module mounting rod by
gently lifting upward.
If you removed a radio module from slot 6 of
5
the control (leftmost) carrier, you must insert
another radio module into this slot. Failure to do so
will cause the carriers to go out of synchronization.
Swapping Extensions
If you want to change your phone's extension number assignment, make sure the radio
module or carrier is unplugged before you unplug the telephone line cord from the
communications system switch/control unit. Power down and then repower the
carrier(s) after all extension changes are made.
Maintaining the MDW 9010
4-5
Advertisement
Table of Contents
