Safety Instructions - Sartorius Entris Operating Instructions Manual

Laboratory balances
Table of Contents

Advertisement

Safety Instructions

Guidelines and General Information
– The balance complies with EU Directives and
standards for electrical safety and electro-
magnetic compatibility*. Improper use or
handling can, however, result in damage
and | or injury.
Any improper use or operation of the
balance, i.e., that is not consistent with the
instructions, will result in forfeiture of all
claims under the manufacturer's warranty.
– Personnel need to have read and understood
these installation instructions, including the
safety instructions.
– In the event of use in systems and ambient
conditions which have greater safety
requirements, you must observe the
requirements and provisions applicable in
your country.
– Always keep the equipment and balance
freely accessible.
Any installation work or balance operation
that does not conform to the instructions
will result in forfeiture of all claims under the
manufacturer's warranty.
*
= see "Specifications"
Danger of explosion
Do not use this equipment in
hazardous areas in which explosive
materials are present.
Make sure that the voltage rating
printed on the AC adaptor is identical
to your local mains voltage.
Installation Instructions
Do not operate the device if the
housing or AC adaptor is damaged.
Immediately disconnect the damaged
device from the power by pulling the
plug.
4
Do not expose the balance, its power
supply or accessories supplied by
Sartorius to extreme temperatures,
aggressive chemical vapors,
moisture, shock, vibrations or strong
electromagnetic fields.
Observe the conditions of operation
described in the "Technical Data"!
Note on Installation:
The operator shall be solely
responsible for any modifications to
the equipment and for connecting any
cables or equipment not supplied by
Sartorius. Information on operational
quality is available upon request from
Sartorius. Only use original Sartorius
accessories!
Note the IP protection class of
the balance and its power supply!
Do not allow liquid penetration.
The protection class specifies the
suitability of equipment for various
environmental conditions (moisture,
foreign bodies).
Before cleaning the AC adapter or the
balance: Unplug the power cord.
The balance may only be opened
by specialized personnel trained by
Sartorius.
Do not open the AC adaptor.
If glass breaks, there is a risk of injury
posed by cuts on glass edges.
Lay the cables where they pose no risk
of causing someone to trip.
Observe the additional safety and danger
information in the following chapters.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents