5 SETTINGS
d) APPLICATION EXAMPLE
Direct analog input FlexAnalog parameters (the
in other N60 functions that use FlexAnalog parameters.
The
to
DIR ANA 1 INTEGRITY
to
FORCED
DIR ANA 32 FORCED
operand can be active (logic 1) at any time. If a direct device is offline, all of the associated trigger operands will be inactive
(logic 0).
The following figure illustrates the operation of the direct analogs feature.
In this example, UR-1 is configured to use four out of its 32 analog channels. These four values are selected from two
sources. UR-2 is configured to receive two out of the four analog values sent, and UR-3 is set to receive three values. Note
that
is effectively being received at both UR-2 and UR-3.
SRC 2 FREQ
Pool of
FlexAnalog
parameters
Pool of
FlexAnalog
parameters
Pool of
FlexAnalog
parameters
a) OVERVIEW
PATH: SETTINGS
INPUTS/OUTPUTS
DIRECT INTEGERS
MESSAGE
GE Multilin
N60 Network Stability and Synchrophasor Measurement System
DIR ANALOG INPUT 1
,
DIR ANA 32 INTEGRITY
DIR ANA 1 DEADBAND
FlexLogic™ operands are provided to indicate the most recent trigger condition: Only one
UR-1
SRC1 P
Analog Out 1
SRC1 PF
Analog Out 2
SRC2 FREQ
Analog Out 3
SRC1 V1 Mag
Analog Out 4
UR-2
Remote Analog 7
Analog In 7
Remote Analog 3
Analog In 3
UR-3
Remote Analog 2
Analog In 2
Remote Analog 3
Analog In 3
Remote Analog 9
Analog In 9
Figure 5–100: DIRECT ANALOGS SAMPLE APPLICATION
DIRECT INTEGERS
DIRECT INTEGER
OUTPUTS
DIRECT INTEGER
INPUTS
5.8 INPUTS AND OUTPUTS
to
values) are available for use
DIR ANALOG INPUT 32
to
DIR ANA 32 DEADBAND
UR-1 is configured to send four
analog values as outputs 1, 2, 3,
and 4, respectively.
TX
RX
UR-2 is configured to receive
SRC1 P
and
SRC2 FREQ
from
UR-1 as direct analog inputs 7
and 3, respectively.
TX
RX
UR-3 is configured to receive
SRC1 PF SRC2 FREQ
,
, and
SRC1 V1 Mag
from UR-1 as
direct analog inputs 2, 3, and 9,
respectively
847007A1.CDR
5.8.12 DIRECT INTEGER INPUTS AND OUTPUTS
See page 5–238.
See page 5–238.
, and
DIR ANA 1
5
5-237