Table of Contents
Advertisement
System Parameters
Table 2-18
Parameter
tmo_idle
tmo_menu
tmo_pickup
tmo_resume
H
tmo_serial
tmo_silence
tmo_sound
Stratagy DK I&P R2 November 1998
Refer to the Stratagy Library CD-Rom for more details.
Stratagy DK System Configuration Parameters - Definitions and
(Cont.)
Settings
Description
When this value is greater than 0, it enables a special function in Stratagy to
go off-hook and back on-hook whenever a port is idle for the specified
number of seconds. This is necessary only under rare circumstances when a
telephone switch may not release a station that is connected to Stratagy
even after Stratagy has gone on-hook.
Default: 0
Amount of time Stratagy waits before repeating a choice menu.
Possible values: 1 ~ 99 (units of 100 ms)
Default: 20 (2 seconds)
Minimum amount of time the system waits between an on-hook and off-hook
event.
Possible values: 10 ~ 99 (units of 100 ms)
Default: 20 (2 seconds)
Number of seconds Stratagy pauses the current message when the user is
listening to one of his/her messages. If this period elapses and the user does
not tell Stratagy to resume, Stratagy automatically continues to play
messages.
Possible values: 0 ~ 255 (seconds)
Default: 30 (seconds)
Maximum number of seconds Stratagy waits for a response when
communicating with peripheral devices through a serial port. Otherwise,
Stratagy could potentially wait forever.
Possible values: 2 ~ 99 (seconds)
Default: 2
Maximum amount of silence time the system waits before deciding to finish a
recording and hang up.
Possible values: 3 ~ 9 (seconds)
Default: 5
Maximum amount of sound/dial tone time the system waits before deciding
to finish a recording and hang up.
Possible values: 3 ~ 9 (seconds)
Default: 5
Configuring Stratagy
2-15
Advertisement
Table of Contents
