Table of Contents
Advertisement
Before You Start...
Get ready to install Toshiba's Stratagy DK, one of the most efficient voice
processing systems available! To make this installation go smoothly, before
doing anything else, please read and complete both sides of this
checklist:
1
Do you know
how to handle
Stratagy DK?
Handle it with loving
care and it will last a
long time...
H
2
Do you have
everything
you need?
Need more details?
They're inside the
Stratagy DK
Installation &
Programming Guide.
Stratagy DK I&P R2 November 1998
Refer to the Stratagy Library CD-Rom for more details.
❐
Whenever handling Stratagy DK, always wear
the anti-static wrist strap (included); keep
the strap by the unit. Always hold the unit by
its edges. Remember that electrostatic charge
from your body, even your own body oils can
damage Stratagy DK.
❐
Never drop or jar Stratagy DK! The unit's hard
drive is extremely sensitive to dropping or
excessive force during installation.
❐
Temperature changes greater than 20°F cause
condensation on Stratagy DK's hard drive. Wait
24 hours before installation if there is such a
temperature variation.
❐
What comes shipped: Stratagy DK comes
complete with pre-loaded operating software,
documentation package and the anti-static
wrist strap. Make sure nothing is missing or
damaged.
❐
Local Administration? You'll need a portable/
desktop PC with DOS 6.2, 5MB hard drive
space, 3.5" 1.44 floppy drive, and
580KB free RAM. You'll need a 9-pin null-
modem serial cable or Toshiba's SG-ADMIN-
CABLE cable to connect your PC to
Stratagy DK.
❐
Remote (modem) Administration? Use
Stratagy Admin software (up to 9600 baud) with
Toshiba's SG-RMOD modem or a Hayes-
compatible, 14.4 baud, V32.bis modem
connected to Stratagy DK's serial Port 2; don't
forget the 9-pin serial cable.
❐
You can also use Stratagy DK's internal (soft)
2400-baud modem and administrate through its
phone connection.
Advertisement
Table of Contents
