Table of Contents
Advertisement
System Parameters
Table 2-18
Parameter
databits2
parity1
parity2
serial_port1
H
serial_port2
stopbits1
stopbits2
Stratagy DK I&P R2 November 1998
Refer to the Stratagy Library CD-Rom for more details.
Stratagy DK System Configuration Parameters - Definitions and
(Cont.)
Settings
Description
Number of data bits for logical serial port 2.
Possible values: 7, 8
Default: 8
Parity to use for logical serial port 1.
Possible values: none, even, odd, mark, space
Default: even
Parity to use for logical serial port 2.
Possible values: none, even, odd, mark, space
Default: none
In order for Stratagy to communicate with peripheral devices connected to
COM/RS232 ports, it needs to know which ports are connected. There is a
mapping from the port that Stratagy knows to the physical port on the
computer. This mapping is defined by this parameter. To define serial port 1
as active, simply define the COM port where it should be mapped.
Examples: Set this parameter to 1 to connect serial port 1 (Stratagy) to
COM1.
Possible values: 0 (not connected), 1 (COM1), 2 (COM2), 3 (COM3), 4
(COM4)
Default: 1
Note
COM 3 & 4 are not supported by Stratagy DK.
In order for Stratagy to communicate with peripheral devices connected to
COM/RS232 ports, it needs to know which ports are connected. There is a
mapping from the port that Stratagy knows to the physical port on the
computer. This mapping is defined by this parameter. To define serial port 2
as active, simply define the COM port where it should be mapped.
Examples: Set this parameter to 2 to connect serial port 2 (Stratagy) to
COM2.
Possible values: 0 (not connected), 1 (COM1), 2 (COM2), 3 (COM3), 4
Default: 2
Note
COM 3 & 4 are not supported by Stratagy DK.
Number of stop bits to use for logical serial port 1.
Possible values: 0, 1, 2
Default: 1
Number of stop bits to use for logical serial port 2.
Possible values: 0, 1, 2
Default: 1
(COM4)
Configuring Stratagy
2-17
Advertisement
Table of Contents
