Table of Contents
Advertisement
System Parameters
Table 2-18
Parameter
n_ochan
nam_maxlen
new_send
H
notify_
restriction
partial_q_ok
password
pbx_type
Stratagy DK I&P R2 November 1998
Refer to the Stratagy Library CD-Rom for more details.
Stratagy DK System Configuration Parameters - Definitions and
(Cont.)
Settings
Description
Number of dedicated ports (starting at port 1) to reserve for outbound notify
ports. This number must not exceed the total number of available ports.
When set, the defined port will not accept incoming calls.
Important!
Possible values: 0 ~ 24 (number of ports)
Default: 0
Maximum number of seconds to allow for recording a User ID's name. The
name recording is used for directory access and whenever Stratagy tries to
identify the User ID.
Possible values: 1 ~ 99 (seconds)
Default: 5
When this option is set to 'True', it allows a User ID to send a message to
multiple User ID's without creating a destination list.
Possible values: true, false
Default: false
Whether Stratagy restricts Notify to use only the defined port. The port still
takes incoming calls. This is particularly useful for those switches that
require message lights to be turned off by the same port that turned them
on.
Possible values: 1, 2, ..., highest port number
Default: comment line (#set notify_restriction 1)
To enable, remove the starting # and set the value.
This option set to true enables the
though not all prompts are completed.
Possible values: true, false
Default: false
Sets the system password. The password is case sensitive; i.e., uppercase
letters are different from lowercase letters.
Possible values: up to eight alphabetical characters. The single quotes are
Default: 'Stratagy'
Defines the model of Strata DK that is used as the host system.
Possible values: DK1440, DK1440S, DKABCD, DKABCDS, DKEF, DKEFS
Default: DKabcd
Important!
If the value is set to 0, Stratagy will attempt to use the
highest numbered IDLE port. The danger of this is that
Stratagy may inadvertently begin a notification on a port
with an incoming call.
Q( )
required.
For more details see "Toshiba Plug and Play" on Page
1-23
Configuring Stratagy
token to save the message even
2-11
Advertisement
Table of Contents
