Table of Contents
Advertisement
Configuring Stratagy
Stratagy DK System Configuration Parameters - Definitions and
Table 2-18
Settings
Parameter
adpcm_nq
adpcm_pq
auto_report
H
auto_report_
time
begin_rec_
prompt
2-2
(Cont.)
Description
Sampling rate for incoming messages. The higher the sampling rate (kilobits
per second), the better the sound quality. However, the amount of hard drive
space used is also higher.
CAUTION! If you change this on an active system, all previously
recorded messages will be lost.
Possible values: 32, 64
Recommended value: 32
Default: 32
Sampling rate for the system prompt file. This is predetermined by the
sampling rate (kilobits per second), at which the system prompt file was
recorded.
CAUTION! Do not change this parameter. All Stratagy system prompt
files are recorded at 32 bits per second sampling rate.
Default:
32
Report definition file (created using Stratagy's Main Menu's Reports
parameter—See Chapter 17 – System Tracking
to be used to generate automatically a report at the time specified by
auto_report_time .
Example:
'daily.rpt'
Possible values: valid DOS file name. The single quotes are required.
Default: (no report name)
When to generate the automatic report using the file specified in
auto_report . The value is in 24-hour format with the colon (:) omitted.
Example:
1:30 a.m. is 0130
2:15 p.m. is 1415
Possible values: 0 (do not generate the auto_report ), 0001 ~ 2400
Default: 0
Whether the system says "Begin recording at the tone, ... or hang up" before
taking a message. This also affects the "to re-record press 2" and "to append
press 3" menu selections during the record menu that is given after a
recording.
TRUE:
The system plays the above prompt.
FALSE:
The system does not play the above prompt. The caller only
hears a tone.
Possible values: true, false
Default: true
Stratagy DK I&P R2 November 1998
Refer to the Stratagy Library CD-Rom for more details.
System Parameters
in the Stratagy I&M Manual .)
Advertisement
Table of Contents
