Mounting The Dome Camera Using The Side Cable Entry Hole - Avigilon 6.0L-H4F-DO1-IR Installation Manual

9. Align the camera base to the pilot holes then use the provided self-tapping screws to secure the camera
to the mounting surface.

Mounting the Dome Camera Using the Side Cable Entry Hole

Perform the following steps if the required cables will be run along the mounting surface. Use this procedure if
the mounting surface is difficult to drill into, or if the cables must be routed outside of the mounting surface.
If you do not need to use the auxiliary cable, skip the relevant steps.
Mounting the Dome Camera Using the Side Cable Entry Hole 13