Mounting The Dome Camera - Avigilon 1.0-H3-DC1 Installation Manual

Mounting the Dome Camera

Perform the following steps to mount the dome camera to the ceiling:
1. Use the hole template to cut a 140 mm (5.5") hole in a
ceiling panel.
2. Insert the dome camera into the hole, and pull the cables
through the dome camera's cable entry hole.
3. Tighten the two clamping screws until the dome camera is
secured to the ceiling.
NOTE: Over-tightening the clamping screws may cause damage to the
ceiling or in-ceiling mount
Caution — The ceiling material must be able to sustain a
minimum of 0.6 kg (1.2 lbs).
Caution — This camera is designed for indoor use only.
6
.