Mounting The Dome Camera Using The Side Cable Entry Hole - Avigilon H4A-DO1, H4A-DO1-IR, H4A-DO2, H4A-G-DO1-IR Installation Manual

Mounting the Dome Camera Using the Side Cable Entry Hole

Perform the following steps if you will be mounting to a surface with the required cables coming out of an
external conduit pipe. Use this procedure if the mounting surface cannot be easily cut, or when cables must be
brought along the outside of the mounting surface.
1. Use the mounting template to drill three mounting holes and position the conduit pipe correctly.
2. Pull the required cables through the conduit.
3. Pull the required cables through the provided pipe grommet.
NOTE: The pipe grommet only accepts uncrimped Ethernet cables.
10 Mounting the Dome Camera Using the Side Cable Entry Hole