Settings; Overview Of Settings - Grundfos MAGNA3 Installation And Operating Instructions Manual

7. Settings

7.1 Overview of settings

All settings can be made on the pump control panel or with the Grundfos GO Remote.
Menu
Setpoint
Operating mode
Control mode
FLOW
LIMIT
Automatic Night Setback
Relay outputs
Setpoint influence
Bus communication
General settings
Submenu
• Normal
• Stop
• Min.
• Max.
• AUTO
ADAPT
• FLOW
ADAPT
• Prop. press.
• Const. press.
• Const. temp.
• Differential temperature
• Constant curve
• Set FLOW
LIMIT
• Not active
• Active
• Relay output 1
• Relay output 2
• External setpoint function
• Temperature influence
• Pump number
• Language
• Set date and time
• Units
• Enable/disable settings
• Delete history
• Define Home display
• Display brightness
• Return to factory settings
• Run start-up guide
Further information
Setpoint
See section 13.1 .
Operating mode
See section 13.2
Control mode
See section 13.3 .
See section 13.3.1 AUTO
ADAPT
See section 13.3.2 FLOW
ADAPT
See section 13.3.3 Proportional pressure.
See section 13.3.4 Constant pressure.
See section 13.3.5 Constant temperature.
See section 13.3.6 Differential temperature.
See section 13.3.7 Constant curve.
See section 13.4 FLOW .
LIMIT
Automatic Night Setback
See section 13.5
Relay outputs
See section 13.6 .
Setpoint influence
See section 13.7
External setpoint function
See section 13.7.1
Temperature influence
See section 13.7.2
Bus communication
See section 13.8
Pump number
See section 13.8.1
General settings
See section 13.9
Language
See section 13.9.1 .
Set date and time
See section 13.9.2
Units
See section 13.9.3 .
Enable/disable settings
See section 13.9.4
Delete history
See section 13.9.5
Define Home display
See section 13.9.6
Display brightness
See section 13.9.7
Return to factory settings
See section 13.9.8
Run start-up guide
See section 13.9.9
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
19