Grundfos MAGNA3 Installation And Operating Instructions Manual page 30

13.9.2 Set date and time
Navigation
Home > Settings > General settings > Set date and time
Set date and time
Select date format
•
Set date
•
Select time format
•
Set time.
•
Set the real-time clock in this menu.
Select date format
YYYY-MM-DD
•
DD-MM-YYYY
•
MM-DD-YYYY.
•
Setting:
1. Select "Set date".
2. Press [OK] to start the setting.
3. Select digit with and and adjust with
4. Press [OK] to save.
Select time format
HH:MM 24-hour clock
•
HH:MM am/pm 12-hour clock.
•
Setting:
1. Select "Set time".
2. Press [OK] to start the setting.
3. Select digit with and and adjust with
4. Press [OK] to save.
30
13.9.3 Units
Navigation
Home > Settings > General settings > Units
Units
SI or US units
•
• Customized units.
Select whether the display should shows SI or US units or select
the desired units for the parameters below.
Pressure
•
Differential pressure
•
Head
•
Level
•
Flow rate
•
Volume
•
Temperature
•
Differential temp.
•
Power
•
or .
Energy.
•
Setting:
1. Select parameter and press [OK].
2. Select unit with
3. Press [OK] to enable.
If "SI or US units" is selected, the customized units will be reset.
or .
or .