Replacing The Remote Control Batteries; Headphones Operation - Jeep grand cherokee 2016 Operating Information Manual

10. POPUP/MENU — Push to bring up repeat
and shuffle options, the Blu-ray™ Disc
popup menu, the DVD title menu or to
access disc menus.
11. KEYPAD — Push to navigate chapters or
titles.
12. ■ (Stop) — Stops disc play.
13. — Push and hold to fast rewind
through the current audio track or video
chapter.
14. — Mutes headphone audio.
15. BACK — Push to exit out of menus or
return to source selection screen.
16. — Push to navigate menus.
17. OK — Push to select the highlighted option
in a menu.
18. — Push to navigate menus.
19. — Push to navigate menus.
Replacing The Remote Control
Batteries
The remote control requires two AAA batteries
for operation. To replace the batteries:
• Locate the battery compartment on the back
of the remote, then slide the battery cover
downward.
• Replace the batteries, making sure to orient
them according to the polarity diagram
shown.
• Replace the battery compartment cover.

Headphones Operation

The headphones receive two separate chan-
nels of audio using an infrared transmitter from
the video screen.
If no audio is heard after increasing the volume
control, verify that the screen is turned on, the
channel is not muted and the headphone chan-
nel selector switch is on the desired channel. If
audio is still not heard, check that fully charged
batteries are installed in the headphones.
Rear Seat Entertainment Headphones
1 — Power Button
2 — Volume Control
3 — Channel Selection Switch
197