Jeep grand cherokee 2016 Operating Information Manual page 187

refer to "Forward Collision Warning (FCW) With
Mitigation" in "Understanding The Features Of
Your Vehicle."
• ParkSense®
The ParkSense® system will scan for objects
behind the vehicle when the transmission shift
lever is in REVERSE and the vehicle speed is
less than 11 mph (18 km/h). It will provide an
alert (audible and/or visual) to indicate the prox-
imity to other objects. The system can be en-
abled with Sound Only, or Sound and Display.
To change the ParkSense® status, press and
release the "Sound Only" or "Sounds and Dis-
play" button. Then press the back arrow button
on the touchscreen. Refer to "ParkSense®" in
"Understanding The Features Of Your Vehicle"
for system function and operating information.
• Front ParkSense® Chime Volume — If
Equipped
The Front ParkSense® Chime Volume settings
can be selected from the Driver Information
Display (DID) or Uconnect® System — if
equipped. The chime volume settings include
LOW, MEDIUM, and HIGH. The factory default
volume setting is MEDIUM. To make your se-
lection, press the "ParkSense® Front Chime
Volume" button on the touchscreen, until a
check-mark appears next to setting, indicating
that the setting had been selected. Press the
back arrow button on the touchscreen to return
to the previous menu. ParkSense® will retain its
last known configuration state through ignition
cycles.
• Rear ParkSense® Chime Volume — If
Equipped
The Rear ParkSense® Chime Volume settings
can be selected from the DID or Uconnect®
System — if equipped. The chime volume set-
tings include LOW, MEDIUM, and HIGH. The
factory default volume setting is MEDIUM. To
make your selection, press the "ParkSense®
Rear Chime Volume" button on the touch-
screen, until a check-mark appears next to
setting, indicating that the setting had been
selected. Press the back arrow button on the
touchscreen to return to the previous menu.
ParkSense® will retain its last known configu-
ration state through ignition cycles.
• Tilt Mirrors In Reverse
When this feature is selected, the exterior
sideview mirrors will tilt downward when the
ignition is in the RUN position and the transmis-
sion shift lever is in the REVERSE position. The
mirrors will move back to their previous position
when the transmission is shifted out of RE-
VERSE. To make your selection, press the "Tilt
Mirrors In Reverse" button on the touchscreen,
until a check-mark appears next to setting,
indicating that the setting had been selected.
Press the back arrow button on the touchscreen
to return to the previous menu.
• Blind Spot Alert
When this feature is selected, the Blind Spot
Alert feature Provides alerts, visual and/or au-
dible, to indicate objects in your blind spot. The
Blind Spot Alert feature can be activated in
"Lights" mode. When this mode is selected, the
Blind Spot Monitor (BSM) system is activated
and will only show a visual alert in the exterior
mirrors. When "Lights & Chime" mode is acti-
vated, the Blind Spot Monitor (BSM) will show a
visual alert in the exterior mirrors as well as an
audible alert when the turn signal is on. When
183