Tire Safety Information - Jeep grand cherokee 2016 Operating Information Manual

system. If this light remains on after several
ignition cycles, and the vehicle has been driven
several miles (kilometers) at speeds greater
than 30 mph (48 km/h), see your authorized
dealer as soon as possible to have the problem
diagnosed and corrected.
The "ESC Activation/Malfunction Indicator
Light" (located in the instrument cluster) starts
to flash as soon as the tires lose traction and the
ESC system becomes active. The "ESC
Activation/Malfunction Indicator Light" also
flashes when TCS is active. If the "ESC
Activation/Malfunction Indicator Light" begins to
flash during acceleration, ease up on the accel-
erator and apply as little throttle as possible. Be
sure to adapt your speed and driving to the
prevailing road conditions.
NOTE:
• The "ESC Off Indicator Light" and the
"ESC Activation/Malfunction
Light" come on momentarily each time
the ignition switch is turned to the ON/
RUN position.
• Each time the ignition is cycled to the
ON/RUN position, the ESC system will be
ON even if it was cycled off previously,
except for when the vehicle is started
while in 4L Range.
• The ESC system will make buzzing or
clicking sounds when it is active. This is
normal; the sounds will stop when ESC
becomes inactive following the maneuver
that caused the ESC activation.
The "ESC OFF Indicator Light" in-
dicates the Electronic Stability
Control (ESC) is partially off or full
off.

TIRE SAFETY INFORMATION

Tire Markings
Indicator
1 — U.S. DOT Safety
Standards Code (TIN)
2 — Size Designation
3 — Service Description 6 — Treadwear, Trac-
4 — Maximum Load
5 — Maximum Pressure
tion and Temperature
Grades
261