Data Logger; Phasor Measurement Unit Records - GE T60 Instruction Manual

6.4 RECORDS
A trigger can be forced here at any time by setting "Yes" to the
menu for information on clearing the oscillography records.
CLEAR RECORDS
PATH: ACTUAL VALUES
 DATA LOGGER

The
OLDEST SAMPLE TIME
gets full, at which time it will start counting at the defined sampling rate. The
most recent samples were taken. It counts up at the defined sampling rate. If the data logger channels are defined, then
both values are static.
Refer to the
COMMANDS
PATH: ACTUAL VALUES
 PMU
 RECORDS
The number of triggers applicable to the phasor measurement unit recorder is indicated by the
The status of the phasor measurement unit recorder is indicated as follows:
PATH: ACTUAL VALUES
6
 PMU 1
 RECORDING
6-28
 
RECORDS

DATA LOGGER

OLDEST SAMPLE TIME:
2000/01/14 13:45:51
NEWEST SAMPLE TIME:
MESSAGE
2000/01/14 15:21:19
represents the time at which the oldest available samples were taken. It will be static until the log
 menu for clearing data logger records.
CLEAR RECORDS
 
RECORDS PMU RECORDS
NUMBER OF TRIGGERS:
0
 PMU 1
MESSAGE
 RECORDING
 
RECORDS PMU RECORDS
PMU 1 FORCE TRIGGER:
Yes
PUM 1 AVAILABLE
MESSAGE
RECORDS: 0
PUM 1 SECONDS
MESSAGE
PER RECORD: 0.0
PUM 1 LAST CLEARED:
MESSAGE
2005/07/14 15:40:16
T60 Transformer Protection System
command. Refer to the
FORCE TRIGGER?
NEWEST SAMPLE TIME

6.4.5 PHASOR MEASUREMENT UNIT RECORDS

Range: 0 to 65535 in steps of 1
See below.

PMU 1 RECORDING
Range: No, Yes
Range: 0 to 65535 in steps of 1
Range: 0 to 6553.5 in steps of 0.1
Range: date and time in format shown
6 ACTUAL VALUES

COMMANDS
6.4.4 DATA LOGGER
represents the time the
value.
NUMBER OF TRIGGERS
GE Multilin