GE T60 Instruction Manual page 194

5.2 PRODUCT SETUP
The settings menu for the fast EGD exchange is shown below:

PATH: SETTINGS PRODUCT SETUP
 FAST PROD EXCH 1
 CONFIGURATION
Fast exchanges (50 to 1000 ms) are generally used in control schemes. The T60 has one fast exchange (exchange 1) and
two slow exchanges (exchange 2 and 3).
5
The settings menu for the slow EGD exchanges is shown below:

PATH: SETTINGS PRODUCT SETUP
 SLOW PROD EXCH 1
 CONFIGURATION
Slow EGD exchanges (500 to 1000 ms) are generally used for the transfer and display of data items. The settings for the
fast and slow exchanges are described below:
• EXCH 1 DESTINATION: This setting specifies the destination IP address of the produced EGD exchange. This is usu-
ally unicast or broadcast.
• EXCH 1 DATA RATE: This setting specifies the rate at which this EGD exchange is transmitted. If the setting is 50 ms,
the exchange data will be updated and sent once every 50 ms. If the setting is 1000 ms, the exchange data will be
updated and sent once per second. EGD exchange 1 has a setting range of 50 to 1000 ms. Exchanges 2 and 3 have a
setting range of 500 to 1000 ms.
5-58

COMMUNICATIONS
EXCH 1 FUNCTION:
Disable
EXCH 1 DESTINATION:
MESSAGE
0.0.0.0
EXCH 1 DATA RATE:
MESSAGE
1000 ms
EXCH 1 DATA ITEM 1:
MESSAGE
0
EXCH 1 DATA ITEM 2:
MESSAGE
0
EXCH 1 DATA ITEM 3:
MESSAGE
0
EXCH 1 DATA ITEM 20:
MESSAGE
0

COMMUNICATIONS
EXCH 1 FUNCTION:
Disable
EXCH 1 DESTINATION:
MESSAGE
0.0.0.0
EXCH 1 DATA RATE:
MESSAGE
1000 ms
EXCH 1 DATA ITEM
MESSAGE
0
EXCH 1 DATA ITEM
MESSAGE
0
EXCH 1 DATA ITEM
MESSAGE
0
EXCH 1 DATA ITEM 50:
MESSAGE
0
T60 Transformer Protection System
 
EGD PROTOCOL FAST PROD EXCH 1 CONFIGURATION
Range: Disable, Enable
Range: standard IP address
Range: 50 to 1000 ms in steps of 1
Range: 0 to 65535 in steps of 1
(Modbus register address range)
Range: 0 to 65535 in steps of 1
(Modbus register address range)
Range: 0 to 65535 in steps of 1
(Modbus register address range)
↓
Range: 0 to 65535 in steps of 1
(Modbus register address range)
 
EGD PROTOCOL SLOW PROD EXCH 1(2) CONFIGURATION
Range: Disable, Enable
Range: standard IP address
Range: 500 to 1000 ms in steps of 1
Range: 0 to 65535 in steps of 1
1:
(Modbus register address range in decimal)
Range: 0 to 65535 in steps of 1
2:
(Modbus register address range in decimal)
Range: 0 to 65535 in steps of 1
3:
(Modbus register address range in decimal)
↓
Range: 0 to 65535 in steps of 1
(Modbus register address range in decimal)
5 SETTINGS
GE Multilin