GE T60 Instruction Manual page 178

Transformer protection system ur series
Hide thumbs Also See for T60:
Table of Contents

Advertisement

5.2 PRODUCT SETUP
The GSSE settings are shown below:
PATH: SETTINGS
PRODUCT SETUP

TRANSMISSION
GSEE
 GSSE
These settings are applicable to GSSE only. If the fixed GOOSE function is enabled, GSSE messages are not transmitted.
The
setting represents the IEC 61850 GSSE application ID name string sent as part of each GSSE message. This
GSSE ID
string identifies the GSSE message to the receiving device. In T60 releases previous to 5.0x, this name string was repre-
sented by the
RELAY NAME
The fixed GOOSE settings are shown below:
PATH: SETTINGS
PRODUCT SETUP

TRANSMISSION
FIXED GOOSE
 FIXED GOOSE
5
These settings are applicable to fixed (DNA/UserSt) GOOSE only.
The
setting represents the IEC 61850 GOOSE application ID (GoID) name string sent as part of each GOOSE
GOOSE ID
message. This string identifies the GOOSE message to the receiving device. In revisions previous to 5.0x, this name string
was represented by the
The
DESTINATION MAC
address; the least significant bit of the first byte must be set. In T60 releases previous to 5.0x, the destination Ethernet MAC
address was determined automatically by taking the sending MAC address (that is, the unique, local MAC address of the
T60) and setting the multicast bit.
The
GOOSE VLAN PRIORITY
have higher priority than other Ethernet data. The
ID for each GOOSE sending device. This value can be left at its default if the feature is not required. Both the
and
PRIORITY
GOOSE ETYPE APPID
5-42

COMMUNICATIONS
GSSE FUNCTION:
Enabled
GSSE ID:
MESSAGE
GSSEOut
DESTINATION MAC:
MESSAGE
000000000000
setting.

COMMUNICATIONS
GOOSE FUNCTION:
Disabled
GOOSE ID:
MESSAGE
GOOSEOut
DESTINATION MAC:
MESSAGE
000000000000
GOOSE VLAN PRIORITY:
MESSAGE
4
GOOSE VLAN ID:
MESSAGE
0
GOOSE ETYPE APPID:
MESSAGE
0
setting.
RELAY NAME
setting allows the destination Ethernet MAC address to be set. This address must be a multicast
setting indicates the Ethernet priority of GOOSE messages. This allows GOOSE messages to
GOOSE ETYPE APPID
settings are required by IEC 61850.
T60 Transformer Protection System

IEC 61850 PROTOCOL
GSSE/GOOSE CONFIGURATION
Range: Enabled, Disabled
Range: 65-character ASCII string
Range: standard MAC address

IEC 61850 PROTOCOL
GSSE/GOOSE CONFIGURATION
Range: Enabled, Disabled
Range: 65-character ASCII string
Range: standard MAC address
Range: 0 to 7 in steps of 1
Range: 0 to 4095 in steps of 1
Range: 0 to 16383 in steps of 1
setting allows the selection of a specific application
5 SETTINGS
GOOSE VLAN
GE Multilin

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents