Making Wi-Fi Settings By Pin Code Setup (Wps); Making Wi-Fi Direct (Simple Ap) Settings - Epson ET-3600/L605 User Manual

User's Guide
If you do not know where the [WPS] button is, or there are no buttons on the access point, see the
documentation provided with your access point for details.
4. Press the OK button on the printer's control panel.
5. Press the OK button.
The screen automatically closes after a specific length of time if you do not press the OK button.
Note:
If connection fails, restart the access point, move it closer to the printer, and then try again. If it still does not work, print
a network connection report and check the solution.
Related Information
"Checking the Network Connection Status" on page 25
&
"When You Cannot Make Network Settings" on page 113
&

Making Wi-Fi Settings by PIN Code Setup (WPS)

You can connect to an access point by using a PIN code. You can use this method to set up if an access point is
capable of WPS (Wi-Fi Protected Setup). Use a computer to enter a PIN code into the access point.
1. Select Wi-Fi Setup on the home screen and then press the OK button.
2. Select PIN Code Setup (WPS) and then press the OK button.
3. Use your computer to enter the PIN code (an eight digit number) displayed on the printer's control panel into
the access point within two minutes.
Note:
See the documentation provided with your access point for details on entering a PIN code.
4. Press the OK button.
Setup is complete when the setup completion message is displayed.
Note:
If connection fails, restart the access point, move it closer to the printer, and then try again. If it still does not work, print
a connection report and check the solution.
Related Information
"Checking the Network Connection Status" on page 25
&
"When You Cannot Make Network Settings" on page 113
&

Making Wi-Fi Direct (Simple AP) Settings

This method allows you to connect the printer directly to computers or smart devices without an access point. The
printer acts as an access point.
Network Settings
22