Epson ET-3843 Quick Start Manual

ET-3843
Start Here
IMPORTANT: Before using this product, make sure you read
these instructions and the safety instructions in the online User's
Guide.
1
Unpack
Do not open the ink bottles until you are ready to fill the ink
Note:
tanks. The ink bottles are vacuum packed to maintain reliability.
1
Remove all protective materials from the product.
Do not touch the flat white cable or the ink tubes and
Caution:
their translucent cover.
2
Connect the power cord to the back of the product and to
an electrical outlet.
Do not connect to your computer yet.
Caution:
2
Choose a setup method
The Epson Smart Panel app can help you set up your printer
®
through an interactive, step-by-step process using your
smartphone or tablet.
To use your mobile device
for setup, continue to
step 1.
1
Download the Epson Smart Panel app
from your device's app store. Do not
launch the app yet.
2
Press the power button to turn on the product.
Do not connect your product to your computer yet.
Note:
3
Launch the app and follow its instructions to set up your
product. If necessary, tap the + icon on the top right corner
of the app's home screen, tap Start setting up, and follow
the instructions to set up your product.
For information on connecting your product to a computer, using
voice-activated printing, or solving problems, or for details on
reaching Epson support, see the sections on the back of this
sheet.
3
Fill ink tanks
Keep the ink bottles out of the reach of children and do not
Warning:
drink the ink.
This product requires careful handling of ink. If ink spills, wipe
Caution:
it off immediately with a damp towel to avoid permanent stains. If ink gets
on your clothes or belongings, it may not come off.
Note:
• Epson cannot guarantee the quality or reliability of third-party ink.
• Use the ink bottles included with the printer to set up the product. Part
of the ink will be used to charge the print head. These bottles may print
fewer pages compared with replacement ink bottles.
• Epson strongly recommends the use of genuine ink to ensure optimal
print quality and performance.
1
With the scanner unit raised, open the ink tank cover, then
open the cap for the black (BK) ink tank.
Refer to the color-coded sticker to identify the color of each
Note:
tank.
or
If you do not want to use a mobile
device for setup, skip to the
"Fill ink tanks" section below.