Printing Slows Down Dramatically During Continuous Printing; Cannot Cancel Printing From A Computer Running Mac Os X V10.6.8; Cannot Start Scanning - Epson ET-3600/L605 User Manual

User's Guide
❏ Enable the bidirectional (or high speed) setting. When this setting is enabled, the print head prints while
moving in both directions, and the printing speed increases.
❏ Windows
Select High Speed on the printer driver's More Options tab.
❏ Mac OS X
Select System Preferences from the
then select the printer. Click Options & Supplies > Options (or Driver). Select On as the High Speed
Printing setting.
❏ Disable Quiet Mode.
❏ Windows
Select Off as the Quiet Mode setting on the printer driver's Main tab.
❏ Mac OS X
Select System Preferences from the
then select the printer. Click Options & Supplies > Options (or Driver). Select Off as the Quiet Mode
setting.

Printing Slows Down Dramatically During Continuous Printing

Printing slows down to prevent the printer mechanism from overheating and being damaged. However, you can
continue printing. To return to normal printing speed, leave the printer idle for at least 30 minutes. Printing speed
does not return to normal if the power is off.

Cannot Cancel Printing from a Computer Running Mac OS X v10.6.8

If you want to stop printing from your computer, make the following settings.
Run Web Config, and then select Port9100 as the Top Priority Protocol setting in AirPrint Setup. Select System
Preferences from the
then add the printer again.
Related Information
"Web Config" on page 93
&

Cannot Start Scanning

❏ Connect the USB cable securely to the printer and the computer.
❏ If you are using a USB hub, try to connect the printer directly to the computer.
❏ If you scan at a high resolution over a network, a communication error may occur. Lower the resolution.
❏ Make sure you select the correct printer (scanner) if a scanner list is displayed when you start Epson Scan 2.
❏ Make sure that the correct printer (scanner) is selected on Epson Scan 2.
❏ If you are using any TWAIN-compliant applications, select the printer (scanner) you are using.
Solving Problems
menu > Printers & Scanners (or Print & Scan, Print & Fax), and
menu > Printers & Scanners (or Print & Scan, Print & Fax), and
menu > Printers & Scanners (or Print & Scan, Print & Fax), remove the printer, and
123