Menu Options For Epson Connect Services - Epson ET-3600/L605 User Manual

User's Guide
In the wireless router utility, enter the PIN code displayed on the printer's screen to connect the
printer to a wireless (Wi-Fi) network.
❏ Wi-Fi Auto Connect
Connects the printer to a wireless (Wi-Fi) network using a computer that is connected to the access
point. Insert the software disc supplied with the printer into the computer, and then follow the on-
screen instructions. When you are prompted to operate the printer, run this menu.
❏ Disable Wi-Fi
Disables the connection by turning off the wireless signal without deleting the network information.
To enable the connection, set up the wireless (Wi-Fi) network again.
❏ Wi-Fi Direct Setup
Connects the printer to a wireless (Wi-Fi) network without a wireless router.
Connection Check
Checks the status of the network connection and prints the network connection report. If there are any
problems with the connection, see the report to solve the problem.
Advanced Setup
Changes the network settings, such as the printer name or TCP/IP Address.
Related Information
"Printing a Network Connection Report" on page 25
&
"Making Wi-Fi Settings by Push Button Setup" on page 21
&
"Making Wi-Fi Settings by PIN Code Setup (WPS)" on page 22
&
"Disabling Wi-Fi from the Control Panel" on page 31
&
"Making Wi-Fi Direct (Simple AP) Settings" on page 22
&
"Making Advanced Network Settings" on page 23
&

Menu Options for Epson Connect Services

Select the menus on the control panel as described below.
Setup > Epson Connect Services
Status
Check whether or not the printer is registered and connected to the Epson Connect services.
Suspend/Resume
Select whether to suspend or resume Epson Connect services.
For registration and usage guides, see the following portal website.
https://www.epsonconnect.com/
http://www.epsonconnect.eu
Restore Default Settings
Resets the settings to their defaults.
Menu Options for Setup Mode
(Europe only)
89