Setting Up Using Wi-Fi Auto Connect; Making Wi-Fi Settings By Pin Code Setup (Wps) - Epson SL-D500 Series User Manual

SL-D500 Series User's Guide
❏ The wireless router is compatible with WPS
(Wi-Fi Protected Setup).
❏ The current Wi-Fi connection was established by
pressing a button on the wireless router.
A
Select Wi-Fi Setup on the home screen.
To select an item, move the focus to the item
using the u/d/l/r buttons, and then press the
Z button.
B
Select Wi-Fi (Recommended).
C
Press the Z button to proceed.
D
Select Push Button (WPS).
E
Hold down the [WPS] button on the wireless
router until the security light flashes.
If you do not know where the [WPS] button is,
or there are no buttons on the wireless router,
see the documentation provided with your
wireless router for details.
F
Press the Z button on the printer's control
panel. Follow the on-screen instruction
hereafter.
Note:
If connection fails, restart the wireless LAN router
(access point), move it closer to the printer, and do
the settings again. If it still does not work, print a
network connection report and check the solution.
Wireless LAN Connection
Related information
"Printing a Network Connection Report" on
U
page 112
Setting Up Using Wi-Fi Auto
Connect
This is a method to set up connections when the
printer software is installed in the computer. Connects
the printer to a wireless (Wi-Fi) network using a
computer that is connected to the access point. Just do
operations according to the screens that appear on
your computer, without the trouble of inputting an
SSID or security key.
Start the installer from the software disc or the
website, and then follow the on-screen instructions to
execute Wi-Fi Auto Connect from the printer's
settings menus.
To install from the website, access the following
website, and then enter the product number.
Download the software from "Download and
Connect" on the Setup Page.
https://epson.sn
Making Wi-Fi Settings by PIN
Code Setup (WPS)
You can automatically connect to an wireless router by
using a PIN code. You can use this method to set up if
an wireless router is capable of WPS (Wi-Fi Protected
Setup). Use a computer to enter a PIN code into the
wireless router.
A
Select Wi-Fi Setup on the home screen.
To select an item, move the focus to the item
using the u/d/l/r buttons, and then press the
Z button.
B
Select Wi-Fi (Recommended).
C
Press the Z button to proceed.
D
Select Others.
111