Printing A Network Status Sheet; Replacing Or Adding New Access Points; Changing The Connection Method To A Computer - Epson ET-3600/L605 User Manual

User's Guide
b. Messages on the Network Environment
Message
*Multiple network names (SSID) that
match your entered network name (SSID)
have been detected. Confirm network
name (SSID).
The Wi-Fi environment needs to be
improved. Turn the wireless router off and
then turn it on. If the connection does not
improve, see the documentation for the
wireless router.
*No more devices can be connected.
Disconnect one of the connected devices if
you want to add another one.
Related Information
"Connecting to a Computer" on page 18
&
"Web Config" on page 93
&
"When You Cannot Make Network Settings" on page 113
&

Printing a Network Status Sheet

You can check the detailed network information by printing it
1. Load papers.
2. Select Setup on the home screen, and then press the OK button.
3. Select Network Settings > Network Status > Print Status Sheet.
x
4. Press the button.
The network status sheet is printed.

Replacing or Adding New Access Points

If the SSID changes due to the replacement of an access point, or an access point is added and a new network
environment is established, re-set the Wi-Fi settings.
Related Information
"Changing the Connection Method to a Computer" on page 29
&

Changing the Connection Method to a Computer

Using the installer and re-set up in a different connection method.
Network Settings
Solution
The same SSID may be set on several access points. Check the settings on the
access points, and change the SSID.
After moving the printer closer to the access point and removing any
obstacles between them, turn the access point on. If it still does not connect,
see the documentation supplied with the access point.
You can simultaneously connect up to four computers and smart devices in
Wi-Fi Direct (Simple AP) connection. To add another computer or smart
device, disconnect one of the connected devices first.
29