In-Wall Touch Screen - Pentair Intellitouch ScreenLogic User Manual

10

In-Wall Touch Screen

The iTC35 (P/N 520502) Interface Kit includes an in-wall color touch screen which is custom configured with the
IntelliTouch ScreenLogic Pool and Spa control application. The operating software is Windows CE .NET bringing
with it numerous applications, including support for Internet browsing, Windows Media Player, local e-mail client,
and word processing. For in-wall touch screen installation instructions, see "In-Wall Touch Screen Installation,"
page 97.
In-Wall Touch Screen Controls
The following describes the in-wall Touch Screen controls:
Virtual Keyboard Toggle Button: Open and close virtual keyboard. To input text into the Digital Tablet,
1
press this button to display the virtual keyboard. Tap the desired letters to enter text. Press the button
again to close the keyboard. Note: Tap the Ctrl key, then the Q key to exit the IntelliTouch ScreenLogic
program. Double-tap the IntelliTouch ScreenLogic icon on the Windows Desktop to restart the program.
Cradle USB (ActiveSync) interface: Enable. Push to Enable USB (ActiveSync) link between PC and
2
Cradle with device secure on Cradle. Not used by IntelliTouch ScreenLogic program.
Launches Internet Explorer Browser: Only works if you are connected to a Broadband Internet
3
connection.
Minimize: Desktop Minimize current application and return to Desktop. Does not work when IntelliTouch
4
ScreenLogic is running.
Center Button - Suspend or Power/Reset:
5
• Quick push enters or exits Suspend Mode
• Push and Hold to Power Off device (hold for about four seconds until display goes off); then Push to
restart and complete (Cold) Boot process. (Only required if Tablet stops responding).
Navigation buttons:
Volume Down: Push on left edge of button.
Volume Up: Push on right edge of button.
Brightness Up: Push on upper edge of button.
Brightness Down: Push on lower edge of button.
Microphone: Microphone opening. Does not work when IntelliTouch ScreenLogic is running.
6
Mono Speaker: Mono speaker opening. Does not work when IntelliTouch ScreenLogic is running.
7
IntelliTouch ScreenLogic User's Guide
7
1 2
In-Wall Touch Screen (Controls)
3 4 6 5