Start Screenlogic Program; Start The Configurator Utility On The Pda; Exit Screenlogic Program; Transfer Time From The Configurator Utility - Pentair Intellitouch ScreenLogic User Manual

Start ScreenLogic Program

To start ScreenLogic after using the Configurator utility:
1. After completing Steps 1 through 5 of the Configurator utility, click the Finish button. The Configurator utility
main screen will display.
2. Click the Start ScreenLogic button.
To start ScreenLogic from the Desktop:
1. Double-click the IntelliTouch ScreenLogic icon on your Desktop.
2. Click the Start ScreenLogic button.

Start the Configurator Utility on the PDA

To start the Configurator utility on the PDA:
• Power up the device. From the desktop, tap Start > IntelliTouch
ScreenLogic. The Configurator utility main screen will display.
• To access the Configurator utility while running ScreenLogic: Tap the X tab
to exit ScreenLogic (as shown on right), then from the desktop, tap Start >
IntelliTouch ScreenLogic.
Note: If you cannot locate the ScreenLogic program, you will need to install
it. For installation instruction see "Setting up the PDA for the first time" on
page 87.

Exit ScreenLogic Program

To exit ScreenLogic on the Tablet:
1. Press the Virtual Keyboard button (first left-side button on the front of the Tablet case).
2. Tap the Ctrl and q key to exit ScreenLogic.
3. Tap OK to close the keyboard.

Transfer Time from the Configurator Utility

Note: Changes and commands made in the Configurator utility may in some cases not be immediate.
Depending on how many changes are made it could take up to 30 seconds to transfer the new settings to
the IntelliTouch system. Using the Schedule feature could take longer.

Compatibility with IntelliTouch Systems

ScreenLogic is compatible with all versions of IntelliTouch systems. In some cases, the ScreenLogic interface may
be used with an IntelliTouch system that has an older version of firmware. Some of the ScreenLogic features will
not operate unless the IntelliTouch firmware is up to date. Example features that may not work include support for
12 lights, Dimmer module support, and 3rd party chlorinator support. Contact your pool builder or Pentair to
purchase the latest IntelliTouch Personality board if these features are necessary.
PDA Main Screen
IntelliTouch ScreenLogic User's Guide
31