Pda Tips And Faqs; Pda On/Off Button (Turn Off Backlight); How Can I Calibrate The Pda Screen; Starting Up The Tablet - Pentair Intellitouch ScreenLogic User Manual

PDA Tips and FAQs

Your PDA is pre-configured at that factory and is ready to use once the Protocol adapter and ScreenLogic wireless
router are installed. While it is charging, you can use and configure the PDA. The charging cradle charges the
battery and provides power for normal operation. When you first switch on the PDA, you will see the boot screen
that is followed by the Microsoft Windows Mobile desktop.

PDA On/Off Button (Turn off Backlight)

Hold the On/Off button for two seconds to switch on/off the backlight. Refer to you Dell User's Guide for more
information.

How can I calibrate the PDA screen?

You may recalibrate the cursor on the touch display when the device is powered on by either accessing Start >
Settings > Control Panel > Stylus or by engaging the virtual keyboard button (left front set of four buttons) and
the left button on the four-way navigation button on the right front face of the device, simultaneously. This is very
useful when the current calibration is way off so as to affect ability to use the touch display to access the software
utility.

Starting Up the Tablet

Your Tablet is pre-configurated at that factory and is ready to use once the Protocol adapter and ScreenLogic
wireless router installed. While it is charging, you can use and configure the Tablet. The charging cradle charges the
battery and provides power for normal operation. When you first switch on the Tablet, you will see the boot screen
that is followed by the Microsoft Windows CE .NET desktop which looks similar to the Microsoft Windows 98,
2000, or XP desktop. Tap Start > Settings > Control Panel to access Windows configuration settings.

What is the first thing I should do with the Digital Tablet or PDA?

• You need to charge the battery.
• Connect the AC adapter provided with the device directly to the power input jack on the cradle for the device
with the device securely seated. Use only the AC-DC adapter provided with the device or purchased as a
specific accessory, your device may not operate and may be damaged if you use the incorrect AC adapter.
• When the device battery is being charged, the battery LED near the top of the front face of the Digital Tablet
will blink slowly in Green.
• When the device battery is fully charged, the battery LED will show a steady Green.
Note: While it is charging, you can use and configure the device.

Why doesn't the Digital Tablet or PDA come charged so that I can turn it on right away?

General shipping restrictions discourage manufacturers from shipping any equipment with fully charged batteries.
You will need to attach the device to the AC power to charge the batteries after receiving it. Use the AC adapter
provided with the device. You can still use the device while it is charging.
IntelliTouch ScreenLogic User's Guide
89