When A Message Appears On The Client Computer - Ricoh Aficio MP W3600 Operating Instructions Manual

Message
Exceeded max.
data capaci-
ty.Check scanning
resolution, then
press Start key
again.
Exceeded max.
page capacity per
file. Press
[Send] to send
the scanned data,
or press [Cancel]
to delete.
Cannot display
preview of this
page.
Reference
"Turning On the Power", About This Machine

When a Message Appears on the Client Computer

This section explains likely causes of and possible solutions for the main error
messages displayed on the client computer when using the TWAIN driver.
Important
❒ If a message not described here appears, act according to the message. For in-
formation about how to turn off the main power switch, see "Turning On the
Power", About This Machine.
Message
Paper misfeed has
occurred.
The scanning area
does not match
the original.
The start posi-
tion of the scan-
ning area does
not match the
original.
Cause
The scanned data ex-
ceeded maximum data
capacity.
The number of scanned
pages exceeded maxi-
mum page capacity.
The size of the image you
want to preview is larger
than A2 (C).
Cause
A paper misfeed has
occurred.
The specified area to be
scanned differs from the
actual scanned area of
the original.
The specified area to be
scanned differs from the
actual scanned area of
the original.
When a Message Appears
Solution
Specify the scan size and resolution
again. Note that it may not be possible to
scan very large originals at a high reso-
lution. See "Relationship between Reso-
lution and Scan Size", Scanner
Reference.
Select whether to send the data so far.
Images larger than A2 (C) cannot be previewed.
Specify A2 (C) or a smaller image, or
scan again at A2 (C) or smaller.
Solution
Remove jammed originals, and place
them again.
Check whether the originals are suitable
to be scanned by the machine.
Check the location of the original.
Check the location of the original.
4
53