Renaming A Log File - GE PM880 User Manual

F e b r u a r y 2 0 0 5
R e n a m i n g a S i t e o r L o g F i l e ( c o n t . )
R e n a m i n g a L o g F i l e
Use the steps below to rename a log file.
A c c e s s i n g t h e L o g M a n a g e r
1. If the menu is active, press
2. Use the arrow key to scroll to Logging and press
3. Use the arrow key to scroll to Log Manager and press
.
[ENTER]
R e n a m i n g a L o g F i l e
1. Use the arrow key to scroll to the desired site.
The list of site files in the Log Manager can be listed
N o t e :
chronologically or alphabetically. Refer to Sorting Files
in the Site/Drive/Log Manager on page 6-15.
2. Press
[MENU]
3. Use the arrow key to scroll to File and press
4. Use the arrow key to scroll to Rename and press
5. Use the arrow keys to scroll to the desired letter or number
and press
[ENTER]
unwanted letters or numbers.
6. Repeat this procedure until you have created the desired log
name of up to eight characters.
7. When you have finished, press
The PM880 renames the file and returns to the Log Manager.
Proceed to What's Next? below.
W h a t ' s N e x t ?
Do one of the following:
•
If desired, repeat steps 1 through 7 above for another file.
•
To exit and return to taking measurements, press
and then press
6 - 8
[MENU]
.
. Press
[F1]
.
[MENU]
.
[ENTER]
(Delete) to delete any
(OK).
[F3]
.
[ENTER]
.
.
[ENTER]
(Exit)
[F3]
M a n a g i n g F i l e s