Updating Pm880 Software - GE PM880 User Manual

F e b r u a r y 2 0 0 5
U p d a t i n g P M 8 8 0 S o f t w a r e
As discussed in Chapter 7, Using the PM880 with a PC or
Printer, the PM880 uses an IR transceiver to transfer files. The IR
function can also be used to upgrade the meter's user program.
The software upgrade includes the bootloader and instrument
software, and the meter and Help string files.
Before you can upgrade the meter's user program, you should
print out or download logs and other settings stored in the
PM880's memory.
C a u t i o n !
To guard against mishap, you should print out,
download or otherwise record all logs, settings and
other data you wish to save.
Once you have backed up your data, refer to the section below to
begin the upgrading procedure.
U p g r a d i n g R e q u i r e m e n t s
To use your PC to download the new user program, your
computer must meet the following requirements.
I n f r a r e d H a r d w a r e
The PM880 is equipped with a built-in IR sensor. Your PC must
have an infrared sensor (built-in or external). If your PC does not
have a built-in IR sensor, you can purchase a compatible IR
dongle. GE Infrastructure Sensing recommends the ActiSys
ACT-IR220L+ infrared to RS232 adapter.
M a i n t a i n i n g a n d T r o u b l e s h o o t i n g t h e P M 8 8 0 8 - 1 5