Displaying Measurements - GE PM880 User Manual

D i s p l a y i n g M e a s u r e m e n t s
The PM880 can display one to four measurement parameters
simultaneously. There are two parts for displaying measurements:
selecting the number of measurements and then selecting the type
of measurements. Refer to Figure 1-9 on page 1-19 for a menu
map.
S e l e c t i n g t h e N u m b e r o f M e a s u r e m e n t s
1. If the menu is not active, press
2. Use the arrow keys to scroll to Site and press
3. Use the arrow keys to move to the desired number of views or
measurement windows (1 View, 2 Views, etc.).
4. Press
[ENTER]
designated number of views (measurement windows).
S e l e c t i n g t h e T y p e s o f M e a s u r e m e n t s
1. Press
[SEL]
you want to change and press
2. Use the arrow keys to scroll to Measurement and press
. The screen appears similar to Figure 1-7 below. The
[ENTER]
left column displays the five measurement types and the right
column displays the measurement units.
F i g u r e 1 - 7 : T h e S e l e c t M e a s u r e m e n t W i n d o w
G e t t i n g S t a r t e d
at your selection. The screen displays the
or arrow keys to move the pointer to the window
.
[MENU]
.
[ENTER]
F e b r u a r y 2 0 0 5
.
[ENTER]
1 - 1 5