GE PM880 User Manual page 118

T r a n s f e r r i n g a F i l e T o a P C ( c o n t . )
S e l e c t i n g a F i l e
1. Use the arrow key to scroll to the desired file. Logs are
associated with the site file in use at the time the log is created
or run. If you do not see the desired log in the list, refer to
Viewing All Logs on page 5-9 to display all the existing logs.
I M P O R T A N T :
2. Press
[MENU]
3. Use the arrow key to scroll to:
•
For Site Manager - Site and press
•
For Drive or Log Manager - File and press
4. Make sure the IR beam on the PM880 has clear access to the
IR sensor on the PC.
5. Use the arrow key to scroll to Transfer and press
6. The PM880 establishes communications with your PC and
uploads the selected file. Respond to any screen prompts from
the PC.
When the upload is complete, the meter returns to the Site/Drive/
Log Manager.
I M P O R T A N T :
U s i n g t h e P M 8 8 0 w i t h a P C a n d P r i n t e r
The list of site files in the Site/Drive/Log
Manager can be listed chronologically or
alphabetically. Refer to Sorting Files in the Site/
Drive/Log Manager on page 6-15.
.
If the PM880 cannot detect an infrared device, a
window appears indicating this problem.
Reposition the PM880 and press
Yes.Consult the factory if the PM880 is unable to
make contact with your PC.
F e b r u a r y 2 0 0 5
.
[ENTER]
[ENTER]
[ENTER]
,
[F3]
.
.
7 - 9