GE PM880 User Manual page 85

F e b r u a r y 2 0 0 5
E n d i n g a L o g
The End and End All Logs commands enables you to stop a log
that is currently running or pending. Once you end a log it cannot
be restarted.
The PM880 also has an Pause command that enables
N o t e :
you to stop the log temporarily. See Pausing a Log on
page 5-6.
Use the following steps to start or restart one or more logs:
A c c e s s i n g t h e L o g M a n a g e r
1. If the menu is not active, press
2. Use the arrow key to scroll to Logging and press
3. Use the arrow key to scroll to Log Manager and press
.
[ENTER]
S e l e c t i n g a L o g F i l e
1. Use the arrow key to scroll to the desired log.
The list of log files in the Log Manager can be listed
N o t e :
chronologically or alphabetically. Refer to Sorting Files
in the Site/Drive/Log Manager on page 6-15.
2. Press
[MENU]
3. Use the arrow key to scroll to Log and press
4. Use the arrow key to scroll to End or End All Logs and press
.
[ENTER]
The PM880 returns to the Log Manager, which displays the
selected log as Finished.
W h a t ' s N e x t ?
Do one of the following:
•
To end another log, repeat the above steps.
•
To return to taking measurements, press
then press
5 - 8
.
.
[MENU]
.
[MENU]
[ENTER]
[F3]
.
[ENTER]
.
(Exit) and
L o g g i n g D a t a