Grundfos CONTROL MPC Installation And Operating Instructions Manual page 5

5. Nameplate
The nameplate of the Control MPC is fitted on the base frame.
See position 2 in fig. 2.
Type: 1
Model: 2
3
Serial No.:
4
Mains supply:
5
I : A
n
No.
7
Fixed speed pumps:
10
E-pumps:
13
Pilot Pump:
16
Order No.:
17
Options:
20
23
IP
24
Weight: kg
25
Nameplate
Fig. 2
Pos. Description
1 Type designation
2 Model
3 Serial number
4 Supply voltage
5 Nominal current [A]
6 Maximum ambient temperature in °C
7 Number of mains-operated pumps
8 Motor power in kW for mains-operated pumps
9 Nominal voltage in volts for mains-operated pumps
10 Number of pumps with frequency converter
11 Motor power in kW for pumps with frequency converter
Nominal voltage in volts for pumps with frequency
12
converter
13 Number of pilot pumps
14 Motor power in kW for pilot pump
15 Nominal voltage in volts for pilot pump
16 Order number
17-22 Options
23 Enclosure class
24 Weight [kg]
25 CE-mark
26 Country of origin
6 o
T : C
AMB.
P U
n
kW V
8 9
11 12
15
14
18 19
21 22
26
Made in
6. Software label
The software label is placed on the back of the CU 351 controller.
1. Control MPC 3. Hydro MPC
1
2. C-MPC options 4. H-MPC options
2
CONFIGURATION STEPS - PLEASE FOLLOW THE NUMBERS
Software label
Fig. 3
Pos. Description
1 Control MPC - GSC file number
2 Control MPC options - GSC file numbers
3 Hydro MPC - GSC file number*
4 Hydro MPC options - GSC file numbers*
5 Pump data - GSC file numbers**
* Applies only to booster systems.
** Applies only to CR, CRI, CRE and CRIE pumps.
A GSC (Grundfos Standard Configuration) file is a
Note
configuration data file.
3
5. Pump data
4 5
96586126
5