Deleting Unwanted Data Portions - 2 Delete; Copying A Phrase - 3 Copy - Roland XP-60 Owner's Manual

Deleting unwanted data portions – 2 Delete
This function deletes a specified area of sequencer data, and
moves the subsequent data to fill the gap. As a result, the
measure length will be shortened by the number of deleted
measures.
Target track
Target track
Selects the track(s) or Pattern from which data will be delet-
ed.
TRK ALL: Phrase tracks 1–16, the Beat track, and the Tempo
track
TRK 1–TRK 16: The specified Phrase track
TRK T: The Tempo track
PTN 001–PTN 100: The specified Pattern
Measure (From), for (to) (Editing area)
Specifies the area from which data will be deleted.
<Procedure>
Make sure that the Track Edit Menu display
(SEQ/TrkEdit) is up.
Press [F6] (Menu) to select Menu 1, then press [F2]
(Delete) to call up the Delete display (SEQ/TrkEdit).
This display can also be called up by moving the cursor to "2
Delete" and pressing [ENTER] on the Track Edit Menu dis-
play (SEQ/TrkEdit). Or press the numeric key [2] and press
[ENTER].
Move the cursor to Target track and select the track(s)
or Pattern from which you want to delete data.
When assigning editing area by measures, move the
cursor to "Measure" and specify the measure number
at which you want deletion to begin, then move the
cursor to "for" to specify the measure length to be
deleted.
When using Locate positions, press [LOCATE], and move
the cursor to "From" to select the Locate number at which
you want deleting to begin. Then move the cursor to "to"
and select the Locate number at which you want deleting to
end.
Press [F6] (Execute) to begin deleting.
124
[SEQUENCER] [F3] (TrkEdit) [2]/[3] [ENTER]
Copying a phrase – 3 Copy
This function copies a specified area of sequencer data. It is
convenient for repeating the same phrase several times. You
can copy Patterns to a Phrase track, or copy data from a
Phrase track to a Pattern.
Source track
Selects the copy source track(s) or Pattern.
TRK ALL: Phrase tracks 1–16, the Beat track, and the Tempo
track
TRK 1–TRK 16: The specified Phrase track
TRK T: The Tempo track
PTN 001–PTN 100: The specified Pattern
Measure (From), for (to) (Editing area)
Specifies the area from which data will be copied.
Destination track
Selects the copy destination track(s) or Pattern.
TRK ALL: Phrase tracks 1–16, the Beat track, and the Tempo
track
TRK 1–TRK 16: The specified Phrase track
TRK T: The Tempo track
PTN 001–PTN 100: The specified Pattern
Measure (Destination measure)
Specifies the copy destination measure.
If you want the copy destination to be right after the last
measure of a song, set this parameter to END.
Mode (Copy mode)
Specifies whether you want to preserve the existing data in
the copy destination when copying.
MIX: Combines the data from the copy source with the exist-
ing data in the copy destination.
Chapter 5. Editing a song
Source track
If you set the Source track parameter to TRK ALL, the
Destination track parameter can be set to either TRK
ALL or PTN 001–PTN 100. If you select PTN 001–PTN
100, the data from the 16 Phrase tracks will be merged
as it is copied.
If you set the Source track parameter to TRK T, the
Destination track parameter will be set to TRK T.
Destination track