Erasing Unwanted Performance Data (Erase); Deleting Unwanted Measures (Delete); Copying Performance Data (Copy) - Roland HP508 Owner's Manual

For details on the basic procedure for Track
Modify functions, refer to p . 64 .
Item Parameter Value
Strength 0–100 %
Quantize
Use this setting when applying shuffle quantize. If this is set to 50
%, notes will sound at equal spacing. As this value is increased, you
Rate
obtain a bouncy effect as with dotted notes.
RANGE MIN, RANGE
Specify the range of notes that are quantized.
MAX

Erasing Unwanted Performance Data (Erase)

This function erases all performance data from the specified region. Since the erased performance data is replaced by rests, the measures themselves
remain.
Specifies the track(s) from which data is erased.
Track All
TRACK
Track1–Track16
Tempo
MEASURE 001–END
Selects the performance data that is erased.
* "Tempo"
ALL
Note
Program Change
Erase
EVENT
Control Change
Pitch Bend
Poly Aftertouch
Channel Aftertouch
System Exclusive
Tempo
If EVENT is set to
Min specifies the minimum value of the range, and Range Max specifies the maximum value of the range.
Range Min, Range
•
Max
•

Deleting Unwanted Measures (Delete)

This function deletes the performance data from the specified region, moving subsequent measures toward the beginning of the song to close the gap.
The length of the song is shortened according to the number of measures in the deleted region.
Specifies the track(s) from which measures are deleted.
Delete
Track All
TRACK
Track1–Track16
Tempo
MEASURE 001–END

Copying Performance Data (Copy)

This function copies the performance data of the specified region. This is convenient when you want to use a certain phrase repeatedly.
Specifies the copy-source track(s).
Copy
ALL
SRC TRACK
Track1–Track16
TEMPO
SRC MEASURE 001–END
Explanation
Use this setting when applying grid quantize. It specifies how greatly the notes will be moved toward
intervals of the note value specified by Grid Resolution.
"100 %,"
If this is set to
With lower values, less timing correction is applied to the notes. With a setting of
correction is applied.
Tracks 1–16 and the tempo track
The specified track
The tempo track
Specifies the region of measures from which data is erased.
can be selected only if TRACK is set to
All performance data
Note messages
Program change messages
Control change messages
Pitch bend messages
Polyphonic aftertouch
Channel aftertouch messages
System aftertouch messages
Tempo data
"Note," "Poly Aftertouch," "Control Change,"
MEMO
If you want to erase all notes or all polyphonic aftertouch data, set Range Min to
"C4," set both Range Min and Range Max to
Max to "C4."
If you want to erase all controller numbers, set Range Min to
"1"
numbers, set Range Min to and Range Max to
"4." If you want to erase numbers 3 through 14, set Range Min to
Tracks 1–16, the time signature track, and the tempo track
The specified track
The tempo track
Specifies the range of measures that are deleted.
Tracks 1–16, the time signature track, and the tempo track
The specified track
The tempo track
Specifies the region of copy-source measures.
notes will be moved all the way to precise intervals of the Grid Resolution timing.
Rate = 50 %
50 50
"Tempo."
"Program Change,"
or
"C1"
"C4." If you want to erase from "C3" through
"0" and Range Max to "127."
"128."
If you want to erase number 4, set both Range Min and Range Max to
"3" and Range Max to
Editing the Song
"0 %," no timing
Rate = 90 %
50 50 90 10 90
you can specify the range of values. Range
"G9."
and Range Max to If you want to erase
"C4," set Range Min to "C3" and Range
If you want to erase all program
"14."
10
65