Initializing Sound Source Settings - 3 Initialize; Performance Initialize; Patch Initialize; Rhythm Set Initialize - Roland XP-60 Owner's Manual

Initializing sound source settings
– 3 Initialize
This function resets settings of the current Patch,
Performance, or Rhythm Set to a standard value or to factory
default settings.
Only current data will be initialized, and data resident
in user memory will not be rewritten. To reset all set-
tings to factory defaults, execute Factory Preset (UTILI-
TY/Preset/Factory Preset).
Data can be initialized in two ways depending on the appli-
cation.
Mode (Initialize mode)
DEFAULT: Resets current data to the standard values called
'initial data' (INIT PATCH, INIT PERFORM or INIT SET).
This mode is selected when creating sound from scratches.
PRESET: Resets the current data in user memory to the fac-
tory settings.
If the current data is a Patch, Performance or Rhythm
Set in preset memory (PR-A–PR-C, GM), and initializa-
tion is performed with PRESET specified, the data will
be reset to the value of the correspondingly numbered
user memory.

Performance initialize

To initialize Performance settings, press [UTILITY] in
Performance mode and execute initialization.

Patch initialize

To initialize Patch settings, press [UTILITY] in Patch mode
and execute initialization.
160
Chapter 8. XP-80 memory settings (Utility mode)

Rhythm Set initialize

To initialize Rhythm Set settings, press [UTILITY] in
Rhythm Set mode and execute initialization.
There are two ways to initialize a Rhythm Set. One is to ini-
tialize only the settings of the specified key of the Rhythm
Set (Key). The other is to initialize the settings of the entire
Rhythm Set (All). Select either method by pressing [F1]
(Key) or [F2] (All).
When Key is selected, move the cursor to Key and select the
key to be initialized. You can specify the key to be initialized
via the keyboard or by pressing TONE SELECT [1]–[4].
<Procedure>
Make sure that the Utility Menu display (UTILITY) is
up.
Press [F6] (Menu) to select Menu 1, then press [F3]
(Init) to select Initialize.
You can also select Initialize by moving the cursor to "3
Initialize" and pressing [ENTER] on the Utility Menu dis-
play (UTILITY) or pressing the numeric key [3], then
[ENTER].
Make sure that the cursor is positioned at "Mode" and
select initialization method.
Press [F6] (Execute) to perform initialization.
[UTILITY] [3] [ENTER]