Table of Contents
Advertisement
5.Editing Recorded Performances
"ALL" appears on the display, and everything from the measure where copy starts
to the final measure is selected automatically.
* Choose "ALL" when you want to copy everything up to the fast bar of the song.
7.
Press the [Accomp/Bass] button.
8.
With the [Fwd] and [Bwd] buttons, designate the first of the measures you want to
copy to, in this case "End."
At this time, the display reads "End" when the end of the song is reached.
* Choose "End" when you want to copy to the end of the song.
9.
Press the Composer [Upper] button.
10.
If you want to make a copy at some location between the start and end of the song,
use the [Fwd] and [Bwd] buttons to choose the number of copies to make.
Here we'll select "2."
* If Performance data exists at the copy destination, it is overwritten by the copy operation.
If you wish to cancel the operation at this point, press the [Function] button, and the but-
ton's indicator will stop blinking.
11.
Pressing the [Rec] button will complete the Copy.
The [Function] indicator will then go out.
Deleting a Measure—Delete
(Edit 4)
This operation cuts out specified measures from the performance data.
When you delete measures this way, performance data following the selected measure (or
measures) is shifted forward.
In this operation, all tracks in the selected measures are deleted.
* Once you use Delete, you will not be able to return to the original version.
Ex.: Deleting Measures Six Through Ten
pee
es Composer
_
Rhythm
Whole
AG@Sip Lower
Upper
i
wy SSE
i
Reset
Stop
es
ao
Cc came) ea
1.
Press the [Function] button (the indicator or begin blinking).
2.
Press the Song [A] and [W] buttons until "Ed.4" appears in the display window.
a
L_Lil
3.
Press the [Rhythm] button.
4.
Using the [Fwd] and [Bwd] buttons, choose the number of the measure from which
you wish to begin the deletion; in this case, choose "6."
At this time, the display reads "End" when the end of the song is reached.
* Selecting "End" for the first bar to be deleted makes it be not in active.
5.
Press the Composer [Whole] button.
45
Advertisement
Table of Contents
