Appendix
2. Open the battery compartment (see page 10) and remove the batteries (if
these have already been inserted).
3. Slide the MEM card cover in the battery compartment in the arrow direction
(OPEN). Softly pivot the cover upwards.
4. Slide the MEM card (with the contact-surface facing downwards) under the
half-moon-holders (a) in the MEM card compartment. Thereby ensure that the
bevelled edge of the MEM card is to the bottom left.
5. Press the MEM card down until it locks in with an audible sound.
2
b
6. Close the MEM card compartment with the cover (slide the cover notches into
the case until the cover complete covers the MEM card).
Note: Never touch the now visible shiny gold contacts!
Static discharge can cause the device to become defective.
a
1
OpenPhone 27 with a MEM card
95