Table of Contents
Advertisement
Features and Menus
4.2.10 "Central settings" Menu
In this menu you can define rules and settings for the time management of your
system.
The
Time control
been granted "Time control" in the Configurator. The
available if the user group of your telephone has been granted "Configurator –
Expert" in the Configurator. If you do not have either of these authorisations this
menu will not be displayed on your telephone.
First select
Central settings
■
Time control
configured. Depending on the activated time group, incoming calls are sig-
nalled on different telephones. Switching between these time groups can be
done manually or automatically, in this case according to a timetable con-
figured by the system administrator.
Select
Automatic
groups then change automatically according to the timetable configured by
the system administrator. This setting remains active until one of the available
time groups is set manually.
The system administrator can configure up to ten time groups. The time
groups are either numbered (default setting) or they have been given names
by the system administrator. You can manually select a specific time group; the
automatic time control is then deactivated.
■
: The date and time are taken over from the exchange on the first
Date/Time
external outgoing call. If this information is not transmitted by your network
operator, you can set the date and time here yourself.
menu item is available if the user group of your telephone has
and then ...
: In the OpenCom 100 / Aastra 800 several time groups can be
to activate automatic time control. The configured time
Note: Any "Divert MSN" always remains in effect, regardless
of the currently active time group.
menu item is
Date/Time
The Menus
87
Advertisement
Table of Contents
