Table of Contents
Advertisement
Features and Menus
–
: As ringer signalling the set melody will only be played once.
Single
–
: Short melody, is also only signalled once
Chirp
■
: You can select the combination of signal generators with which the
Device
call will be signalled. An active signal generator is marked with ". Select the
desired signal generator and switch it on or off with OK.
–
: Activate or deactivate the acoustic ringer tone. If you deactivate the
Buzzer
signal generator then this is shown in the display with the
–
: Activate or deactivate the vibration signal generator.
Vibrator
■
: Select the ringer tone volume signalling (1 ... 7) via entering the digit
Volume
or with the arrow keys and confirm with OK.
: This menu contains the settings for subscribing (checking in) the handset
System
to the base station. Refer also to the information given in the chapter entitled
Commissioning starting on page 14.
■
(OpenPhone 26) /
Subscribe
menu to subscribe the handset to one or more base stations. In this menu you
also administer the subscription records that have been set during check-in
operation. You will find further information in the sections OpenPhone 26's
"Subscribe" menu on page 76 and OpenPhone 27's "Subscription" menu on
page 77.
■
: You can read the International Portable Equipment Identity code of your
IPEI
phone here.
OpenPhone 26's "Subscribe" menu
■
You have selected the menu entry
lowing options:
–
Subscribe PP
station (FP = Fixed Part). If you wish to check in the handset using the secured
procedure, you will need the FP PIN of the base station (also referred to as AC =
Authentication Code). If you are using the simplified procedure, leave this field
76
Note: If you deactivate all signal generators, then the call is
only signalled with a flashing
Subscription
Subscribe
: Subscribes the handset (PP = Portable Part) to the base
symbol.
symbol in the display.
(OpenPhone 27): Use this
. Now select one of the fol-
The Menus
Advertisement
Table of Contents
