Table of Contents
Advertisement
Features and Menus
4.2.11 "Info" Menu
This menu is used to quickly locate messages that have arrived or been saved. The
same menu items can also be found in the main menu. If there are new entries in
the info list then ...
... OpenPhone 26: the Info symbol
... OpenPhone 27: the Info key flashes.
In the idle state
briefly
: Information on missed calls list (refer to the section entitled
Missed calls
"Missed calls" on page 68).
Voicebox mess.
voicebox messages list (refer to the section entitled "Voicebox messages" on
page 69).
Short messages
short messages list (refer to the section entitled "Short messages" on page 72).
: This menu item is only available if there are e-mails in your e-mail list
E-mail
(refer to the section entitled "E-mail" on page 73).
: This menu item is only available if you have at least one active
Appointments
appointment (refer to the section entitled "Appointments" on page 73).
(OpenCom X320 only): See Main menu, menu group
Received fax
: You see the charges for the last call and the total call charges for your
Charges
telephone. When there are multiple trunk keys configured on your telephone, you
can have the charges individually metered. To do so, select the desired key (e. g.
L1: [internal call number]
Active features
using this menu item.
88
press the Info key
: This menu item is only available when there are entries in the
: This menu item is only available when there are entries in the
) and then press the Ok softkey.
: You can access the Active Features menu (see next chapter)
Note: In order to be able to use the Info key, your communi-
cations systems must be using a software version of at least
5.22.
flashes slowly in the display
B
and then select ...
The Menus
.
M essages
Advertisement
Table of Contents
