Table of Contents
Advertisement
Features and Menus
Internal Calls starting on page 38).
time, enter the time in seconds after which a call is to be forwarded (10 ...
120 seconds). If you do not enter a value, the default time interval provided by the
system administrator at system configuration is used (default: 20 seconds). Then
select whether internal calls, external calls or all calls should be forwarded to the
destination number. Activate call forwarding with
indicated by a "+" sign. This is followed by the call forwarding destination.
: "Divert MSN" is available for ISDN multi-terminal accesses. For each
Divert MSN
MSN you can use this form of call forwarding to forward incoming external calls to
external destinations. Several MSNs can be grouped together (this is configured
by the system administrator) and forwarded to a common destination number.
The display indicates a list of the configured MSNs and MSN groups. Select an
entry. Then select
Then key in the external destination number and activate the function. Active call
forwarding is indicated by a "+" sign. This is followed by the call forwarding desti-
nation. A "?" preceding the entry,
warding is active for some MSNs or that there are different call forwardings acti-
vated for this group.
: With this type of call forwarding, all calls signalled by the doorbell
Divert door
are forwarded. If several doorbells are configured on the communications system,
first select the doorbell whose calls are to be diverted. How many door bells are
available and with which names they are listed in the menu, depends on the type
of entrance intercom. Consult your system administrator if you have questions
concerning the configuration of the door bells. Then key in the call forwarding
destination (please refer to the chapter entitled Making External/Internal Calls
starting on page 38). Activate call forwarding with
indicated by a "+" sign. This is followed by the call forwarding destination.
Time
Note: All calls for the call numbers of your telephone are for-
warded. If a number is stored on more than one telephone,
then calls made to any of the other telephones will be for-
warded as well.
,
Immediately
After delay
? MSN Group 1
Note: For this type of call forwarding, the (external) destina-
tion number is always entered without the trunk line seizure
code digit. If "Divert MSN" is executed in the exchange
(= external call forwarding, configured by the system admin-
istrator), it can take a few seconds after configuration for call
forwarding to be activated in the exchange.
: When programming call forwarding after
. Active call forwarding is
on
or
for the forwarding mode.
Busy
for example, means that call for-
. Active call forwarding is
On
The Menus
71
Advertisement
Table of Contents
