Telephoning
To open the door, select the
... opening the door during a call
If the doorbell signal is triggered during a call, you will hear the discreet call-
waiting tone.
To open the door, select the
3.5.4 Entrance Intercom Calls
Calling the entrance intercom
If your system is connected to an entrance intercom, you can use it as follows to
speak with visitors:
A*101
In an enquiry call:
GR*101
If you are operating a "DoorLine" entrance intercom, use the following code
procedure:
A*102
In an enquiry call:
GR*102
Signal when the telephone is in the idle state
A
Press the
key. You can speak with the visitor.
Signal during a call
If the doorbell signal is triggered during a call, you hear a call-waiting tone.
Proceed as described in the section entitled ... opening the door during a call
starting on page 58.
58
Door opener
Door opener
Note: The
Door opener
entrance intercom call. The door opener function controls a
relay contact in your system which can also be connected to
other devices. Consult your system administrator for further
details.
Special Calls/Conversations
menu item in the menu displayed.
menu item in the menu displayed.
menu item is not dependent on an