Table of Contents
Advertisement
Telephoning
subscriber via your headset (only on the OpenPhone 27). The time frame after
which the busy tone is switched off is configured by the system administrator. All
other calls will be ended after 20 seconds if the handset is off-hook.
3.2.8 Using Routes to Make Calls
HZ
(routing code, tel. no.)
Enquiry calls:
GRZ
(routing code, tel. no.)
The OpenCom 100 / Aastra 800 establishes calls to the desired subscribers either
automatically or via specific routes. Your system administrator configures these
routes in the OpenCom 100 / Aastra 800 and specifies how each route is seized. In
order to manually seize a specific route for a call, dial the routing code before
dialling the (internal or external) call number. By making calls via specific routes,
you can e. g. contact subscribers in the branches of a large company network. It is
also possible to use a manually-entered routing code to record your call-charge
data for external private and business calls separately.
For information on the current routes and their codes, please contact your system
administrator.
3.2.9 "Calling ..." Menu
During a call, press the Menu softkey briefly and then select ...
or
Hands-free on
hands-free functionality. This menu point is only displayed with an OpenPhone 27.
: The call will be disconnected.
Disconnect
: You can add the other party's phone number to the OpenCom 100 /
Phone book
Aastra 800 telephone book as a new entry (
existing entry (
Add
During a Call starting on page 62.
44
Note: Menu items marked with an * are only displayed if the
corresponding user authorisation has been set in the Config-
urator.
Hands-free off
). Please see: Add Phone Numbers to Phone Book from Lists or
Making External/Internal Calls
: Here you can activate/deactivate the
) or you can add it to an
New Entry
Advertisement
Table of Contents
