Table of Contents
Advertisement
... opening the door in the idle state
A
Press the
key.
To open the door, select the Door opener menu item in the displayed menu.
... opening the door during a call
If the doorbell signal during a call, you will hear a discreet tone (call-waiting tone).
To open the door, select the Door opener menu item in the displayed menu.
Note
The Door opener menu item is not dependent on an entrance intercom call. The
door opener function controls a relay contact in your system which can also be con-
nected to other devices. Consult your system administrator for further details.
Entrance Intercom Calls
Calling the entrance intercom
If an entrance intercom (doorstation 6-wire) is connected to your system, you can use
this procedure to speak with a visitor.
A*101
Enquiry call:
GR*101
If you are operating an entrance intercom (doorstation 2-wire, e. g. of the "DoorLine"
type), you use the following Code-number procedure:
A*102
Enquiry call:
GR*102
Door call in the idle state
A
Press the
key. You can speak with the visitor.
Door call during a call
If the doorbell signal is triggered during a call, you hear a call-waiting tone. Proceed as
described in the section entitled ... opening the door during a call starting on
page 59.
Making Calls
59
Advertisement
Table of Contents
