Entrance Intercom Calls - Aastra 6771 User Manual

Entrance Intercom Calls

Calling the Entrance Intercom
If an entrance intercom (doorstation 6-wire) is connected to your system, you can use
this procedure to speak with a visitor.
H * 1 0 1
In an enquiry call:
G R * 1 0 1
If you are operating an entrance intercom (doorstation 2-wire, e. g. of the "DoorLine"
type), you use the following Code-number procedure to speak with a visitor:
H * 1 0 2
In an enquiry call:
G R * 1 0 2
Signal When the Handset Is on Hook ...
H
Lift the handset.
• If your system is connected to an entrance intercom, you can speak to your visitor.
• Otherwise you will hear a special door tone when you lift the handset.
Signal During a Call
G
If the doorbell signal is triggered during a call, you hear a call waiting tone. Proceed
as described in the chapter
Call starting on page 80.
Door Call Forwarding
You can forward calls signalled from the doorbell to another (internal or external) call
number, a so-called "pharmacy line". This is done through the Call forwarding menu
(see the section entitled MenuCard "Call Forwarding" starting on page 108).
Call Duration
All door calls are automatically terminated after a specific period has expired. This
ensures that forwarded door calls do not unintentionally lead to continuous calls (e. g.
to a mailbox).
Your system administrator can configure the period in the OpenCom 100 / Aastra 800
from 30 to 300 seconds. Ask him what the current time value is.
Doorbell, Door Opener, section Opening the Door During a
Telephoning
81