Table of Contents
Advertisement
Features and Menus
number see also Making External/Internal Calls starting on page 39). Time: When pro-
gramming call forwarding after time, enter the time in seconds after which a call is to be
forwarded (10 ... 120 seconds). If you do not enter a value, the default time interval pro-
vided by the system administrator at system configuration is used (default: 20 seconds).
Then select whether internal calls, external calls or all calls should be forwarded to the
destination number. Activate call forwarding with On. Active call forwarding is indi-
cated by a "+" sign, this is followed by the call forwarding destination.
Note
All calls for the call numbers of your device are forwarded. If a call number is availa-
ble (that is, also on another device) more than once, then calls to other devices will
also be forwarded. You can activate all three types of forwarding simultaneously, in
which case the call forwarding Immediately has priority.
Divert MSN: With "Divert MSN" (MSN = Call number on a multi-terminal access) it is
possible for each MSN to forward incoming external calls to external destinations.
Several MSNs can be grouped together (this is configured by the system adminis-
trator) and forwarded to a common destination call number.
The display indicates a list of the configured MSNs and MSN groups. Select an entry.
Then select Immediately, After delay or Busy for the forwarding mode. Then key in
the external destination number and activate the function. Active call forwarding is
indicated by a "+". This is followed by the call forwarding destination. A "?" preceding
the entry, ? MSN Group 1 for example, means that call forwarding is active for some
MSNs or that there are various call forwards activated for this group.
Note
For the "Divert MSN" call forwarding, the (external) destination call number is always
entered without the trunk line seizure code digit. If "Divert MSN" is executed in the ex-
change (= external call forwarding, configured by the system administrator), it can take
a few seconds after configuration for call forwarding to be activated in the exchange.
All external calls to the MSN are forwarded. You can activate all three types of forward-
ing simultaneously, in which case the call forwarding Immediately has priority.
Divert door: Here you can programme a "Call forwarding immediately" for door calls.
If several door bells are configured on the communications system, first select the
door bell whose calls are to be diverted. How many door bells are available and with
which names they are listed in the menu, depends on the type of entrance intercom.
72
Advertisement
Table of Contents
